The short version of Reverse-phase HPLC fits in a sentence. The long version — which is the one that helps — is below.
Reviewed 2025-12-28. Anything still debated is marked as such rather than presented as settled.
Published work involving this sequence spans actin-binding assays, cell-migration studies, wound-healing models, and cardiovascular or musculoskeletal experiments. Much of the biological rationale derives from in vitro systems and animal models, and the number of controlled human studies is small. Reported outcomes vary across preparations, doses, and routes, which complicates comparison between studies. Reviews generally describe the evidence base as preliminary rather than settled. Mechanistic explanations are often proposed by analogy to the parent protein rather than demonstrated directly.
TB-500 is a synthetic seven-amino-acid peptide with the sequence LKKTETQ, corresponding to residues 17 through 23 of the protein thymosin beta-4. The N-terminus is typically acetylated in the described form, giving a monoisotopic mass near 888.5 Da and an average mass of about 889 Da. The designation TB-500 is a catalogue label rather than a formal chemical name, and the same sequence appears in the literature under several alternative abbreviations. It is handled as a research reagent rather than a pharmaceutical product.
The regulatory position is broadly consistent across major jurisdictions: no thymosin beta-4 fragment is an approved medicine, and laboratory material is commonly labelled as not intended for human consumption. Anti-doping rules in sport list thymosin beta-4 and its fragments among prohibited peptide hormones. Because these products travel through research-chemical channels rather than pharmaceutical supply chains, quality varies considerably between vendors. Independent testing of identity, purity and sterility is the only dependable check, and a certificate of analysis describes one batch rather than a supplier's whole catalogue.
Lyophilized peptide powder is normally held desiccated at −20 °C, with −80 °C used for longer storage periods. Allowing a sealed vial to reach room temperature before opening is standard practice, because condensation forming on cold powder introduces moisture. Once dissolved, solutions are typically kept cold and shielded from light. Repeated freeze-thaw cycles are avoided because they encourage aggregation and gradual loss of material. These conventions are general to synthetic peptides rather than unique to any one sequence.
Purity and identity are separate measurements and are often confused. Reverse-phase high-performance liquid chromatography, usually with ultraviolet detection near 214 nanometres, reports the share of total peak area belonging to the target compound. Mass spectrometry by electrospray or matrix-assisted laser desorption then checks whether the observed mass matches the expected sequence. Neither measurement alone shows that a vial holds the intended peptide. Peptide content, meaning the fraction of vial mass that is genuine peptide rather than counter-ion, water or residual acid, is reported separately and is frequently lower than the stated purity figure.
| Property | Value | Notes |
|---|---|---|
| Molecular formula | C38H68N10O14 | Acetylated heptapeptide form |
| Monoisotopic mass | 888.5 Da | Average mass about 889 Da |
| Appearance | White to off-white solid | Usually supplied as lyophilised powder |
| Solubility class | Highly water soluble | Also dissolves in aqueous buffers |
| Common synonyms | Tbeta4 fragment, thymosin beta-4 (17-23) | Refer to the same sequence |
The seven-residue chain carries several polar and charged side chains, so it dissolves readily in water and in aqueous buffers near neutral pH. No cysteine is present, so disulphide formation is not a concern and reducing agents are unnecessary. Dilute ammonium hydroxide or acetonitrile-water mixtures are sometimes used for stock solutions when initial dissolution is slow. Strongly alkaline conditions and prolonged contact with oxidising agents are avoided because they can modify lysine-containing stretches, and haze in solution usually signals incomplete dissolution or aggregated material.
Identity and purity are checked with reversed-phase high-performance liquid chromatography, which separates the target sequence from truncated or deletion analogues, and with mass spectrometry, which confirms the expected molecular mass. Amino acid analysis and peptide mapping give orthogonal confirmation but are used less often outside specialist laboratories. Counter-ion content varies: material purified on trifluoroacetic acid gradients retains trifluoroacetate, and ion exchange can convert the salt form. Residual water and solvent are measured by Karl Fischer titration or thermogravimetric analysis, and any purity figure should be read together with the method used to obtain it.
Lyophilised peptide powders are hygroscopic, and the fragment absorbs atmospheric moisture when a vial is opened at room temperature. Weighing and aliquoting are normally done quickly in a dry environment, and stock solutions are divided into single-use portions before freezing. Repeated freeze-thaw cycles are avoided because they promote aggregation and can shift the measured content of a vial. These practices are general to synthetic peptides rather than unique to this sequence, but they matter more for short chains kept for long periods.
TB-500 is a laboratory label applied to a short synthetic peptide that is widely described as a fragment of thymosin beta-4, an actin-binding protein present in most mammalian cells. Suppliers and review articles usually present TB-500 as the N-terminal region of that protein, but the exact sequence attached to the name is not consistent across sources. Some product descriptions list a seven-residue chain; others use the label loosely for the parent protein itself. Because of that variation, any technical discussion of TB-500 needs to state which sequence is meant.
Thymosin beta-4 contains 43 amino acids and has a reported molecular mass near 4963 Da. The short fragment most often associated with the TB-500 label, an acetylated chain beginning LKKTETQ, has a reported mass near 889 Da, so the two are easily separated in analytical work. Mass spectrometry and amino acid analysis can confirm which material is present in a given sample. Statements treating TB-500 and thymosin beta-4 as interchangeable are therefore imprecise, even though the two appear together in much of the same literature.
Lyophilized peptide arrives as a dry cake that should stay sealed until use. Reconstitution is generally performed with sterile water or a buffered solution, and the resulting liquid should be handled gently to limit mechanical stress. Repeated freeze-thaw cycles are widely described as harmful to short peptides, so dividing a reconstituted batch into single-use portions is a common practice. Laboratories also record the solvent, concentration, and date of preparation on the vial label to keep later measurements traceable.
Dry powder is commonly held at minus twenty degrees Celsius, with some suppliers recommending lower temperatures for long-term archival storage. Once dissolved, solutions are typically kept cold and protected from light, since aqueous peptide solutions can lose integrity through hydrolysis or oxidation over time. Stability data specific to this fragment are limited in the public literature, and much of the guidance comes from general peptide handling practice rather than from controlled degradation studies. Users therefore treat stated shelf lives as approximate rather than fixed.
Identity and purity are normally assessed with reversed-phase high-performance liquid chromatography, paired with mass spectrometry to confirm molecular mass. A certificate of analysis reports a purity percentage, usually derived from chromatographic peak area, but that figure does not by itself prove a correct sequence or the absence of counterions. Independent verification may include amino acid analysis or peptide mapping. Batch-to-batch variation is a documented concern in the research chemical market, and the gap between a quoted purity value and actual peptide content can be substantial when the material is a salt or retains residual water.
Alemtuzumab, sold under the brand names Campath and Lemtrada among others, is a medication used to treat chronic lymphocytic leukemia and multiple sclerosis. In chronic lymphocytic leukemia, it has been used as both a first line and second line treatment. It is given by injection into a vein. It is a monoclonal antibody that binds to CD52, a protein present on the surface of mature lymphocytes, but not on the stem cells from which these lymphocytes are derived. After treatment with alemtuzumab, these CD52-bearing lymphocytes are targeted for destruction. Alemtuzumab was approved for medical use in the United States in 2001. (Mab)Campath was withdrawn from the markets in the US and the EU in 2012, to prepare for a higher-priced relaunch of Lemtrada aimed at multiple sclerosis. Alemtuzumab is used for the treatment of B-cell chronic lymphocytic leukemia in people who have been treated with alkylating agents and who have failed fludarabine therapy. It is an unconjugated antibody, thought to work via the activation of antibody-dependent cell-mediated cytotoxicity.
Analysis of Sulfolobus solfataricus CRISPRs revealed further complexities to the canonical model of spacer insertion, as one of its six CRISPR loci inserted new spacers randomly throughout its CRISPR array, as opposed to inserting closest to the leader sequence. Multiple CRISPRs contain many spacers to the same phage. The mechanism that causes this phenomenon was discovered in the type I-E system of E. coli. A significant enhancement in spacer acquisition was detected where spacers already target the phage, even mismatches to the protospacer. This 'priming' requires the Cas proteins involved in both acquisition and interference to interact with each other. Newly acquired spacers that result from the priming mechanism are always found on the same strand as the priming spacer. This observation led to the hypothesis that the acquisition machinery slides along the foreign DNA after priming to find a new protospacer.
A disintegrin and metalloproteinase with thrombospondin motifs 7 (ADAMTS7) is an enzyme that in humans is encoded by the ADAMTS7 gene on chromosome 15. It is ubiquitously expressed in many tissues and cell types. This enzyme was historically reported to catalyze the degradation of cartilage oligomeric matrix protein (COMP), though subsequent studies using purified proteins and unbiased mass spectrometry found that ADAMTS7 does not cleave COMP. ADAMTS7 has been associated with cancer and arthritis in multiple tissue types. The ADAMTS7 gene is a well-established genetic susceptibility locus for coronary artery disease. The ADAMTS7 gene resides on chromosome 15 at the band 15q24.2 and contains 25 exons.
The topology of a β-sheet describes the order of hydrogen-bonded β-strands along the backbone. For example, the flavodoxin fold has a five-stranded, parallel β-sheet with topology 21345; thus, the edge strands are β-strand 2 and β-strand 5 along the backbone. Spelled out explicitly, β-strand 2 is H-bonded to β-strand 1, which is H-bonded to β-strand 3, which is H-bonded to β-strand 4, which is H-bonded to β-strand 5, the other edge strand. In the same system, the Greek key motif described above has a 4123 topology. The secondary structure of a β-sheet can be described roughly by giving the number of strands, their topology, and whether their hydrogen bonds are parallel or antiparallel. β-sheets can be open, meaning that they have two edge strands (as in the flavodoxin fold or the immunoglobulin fold) or they can be closed β-barrels (such as the TIM barrel). β-Barrels are often described by their stagger or shear. Some open β-sheets are very curved and fold over on themselves (as in the SH3 domain) or form horseshoe shapes (as in the ribonuclease inhibitor). Open β-sheets can assemble face-to-face (such as the β-propeller domain or immunoglobulin fold) or edge-to-edge, forming one big β-sheet.
Side effects are rare. Reported adverse events include seizures, changes in color vision, blood clots, and allergic reactions such as anaphylaxis. Whether the risk of venous thromboembolism (blood clots) is increased is a matter of debate. The risk is mentioned in the product literature, and they were reported in post marketing experience. Despite this, and the inhibitory effect of tranexamic acid on blood clot breakdown, large studies of the use of tranexamic acid have not shown an increase in the risk of venous or arterial thrombosis, even in people who had previously experienced thrombosis under other circumstances. For pregnancy, no harm has been found in animal studies. Small amounts appear in breast milk if taken during lactation. Tranexamic acid was first synthesized in 1962 by Japanese researchers Shosuke and Utako Okamoto. It is on the World Health Organization's List of Essential Medicines.
Sources: en.wikipedia.org
Because of the numerous effects claimed by traditional medicine, there has been considerable basic research to investigate the biological properties of the fruit phytochemicals. The composition of the fruits, seeds, roots, and other constituents has been analyzed, and extracts are under study. Constituents include carotenoids, polysaccharides (comprising 30% of the pulp), vitamins, fatty acids, and peptidoglycans. Various polyphenols occur in the fruit, leaves, and root bark. One monograph indicated that consuming goji for three months or longer may improve cardiometabolic risk factors in healthy Chinese adults, although there was only low-quality evidence for such effects. A limited analysis of four studies concluded that healthy Chinese adults who consumed dried goji berries, juice or capsules for 4-16 weeks had slightly lower blood triglyceride levels and higher HDL cholesterol levels.
ALK-positive ALCL is diagnosed by histological and immunological examinations of involved tissues, typically lymph nodes. These tissues have lymphoma-like infiltrates that have variable numbers of ALCL "hallmark" cells, i.e. cells with kidney- or horseshoe-shaped nuclei that strongly express CD30 as detected by immunohistochemistry and an ALK fusion protein as detected by fluorescence in situ hybridization. These cells are scattered throughout the infiltrates. WHO classifies these infiltrates into 5 patterns: a common pattern consisting of large variably shaped cells with large nuclei that typically contain multiple nucleoli (60–70% of cases); a small-cell pattern consisting of small to medium-sized neoplastic cells with clear cytoplasm and "hallmark" cells that are concentrated around small blood vessels (5–10% of cases); a lymphohistiocytic pattern consisting of small neoplastic cells along with abundant histiocytes (10% of cases); a Hodgkin's-like pattern in which the architecture resembles the nodular sclerosis pattern of Hodgkin lymphoma (3% of cases); and a composite pattern consisting of two or more of the just described patterns (15% of cases). Detection of circulating autoantibody against ALK supports the diagnosis. Individuals with low levels of these autoantibodies are at an increase risk of relapsing after treatment.
A composite cross population (CCP) is created by crossing a number of plants from different lines, and subsequently bulking seeds from the resulting offspring. This makes a CCP a population of plants with a lot of inherent genetic diversity, in contrast to monocultures where all plants are clones and homozygous at all loci (fully inbred). In recent years CCPs have been proposed as a way to create modern landraces of wheat, barley and oats. Research is done to explore whether they are better suited for organic farming than the modern cultivars. They are suited for participatory breeding of crops, which is in contrast to cultivars owned by big breeding companies. The idea of using CCPs in plant breeding was published in 1956 based on the barley composite cross devised by Harry Harlan and Mary Martini in 1929. Yield data for 4 different populations for 8–28 years were presented in the article and after 8–15 years of repeated breeding under natural selection, the populations out-yielded the reference cultivar.
Enzymatic specificity provides useful insight into enzyme structure, which ultimately determines and plays a role in physiological functions. Specificity studies also may provide information of the catalytic mechanism. Specificity is important for novel drug discovery and the field of clinical research, with new drugs being tested for its specificity to the target molecule in various rounds of clinical trials. Drugs must contain as specific as possible structures in order to minimize the possibility of off-target affects that would produce unfavorable symptoms in the patient. Drugs depend on the specificity of the designed molecules and formulations to inhibit particular molecular targets. Novel drug discovery progresses with experiments involving highly specific compounds. For example, the basis that drugs must successfully be proven to accomplish is both the ability to bind the target receptor in the physiological environment with high specificity and also its ability to transduce a signal to produce a favorable biological effect against the sickness or disease that the drug is intended to negate.
Sources: en.wikipedia.org
Because their backbones are longer than those of normal peptides, β-peptides form disparate secondary structures. The alkyl substituents at both the α and β positions in a β-amino acid favor a gauche conformation about the bond between the α-carbon and β-carbon. This also affects the thermodynamic stability of the structure. Many types of helix structures consisting of β-peptides have been reported. These conformation types are distinguished by the number of atoms in the hydrogen-bonded ring that is formed in solution; 8-helix, 10-helix, 12-helix, 14-helix, and 10/12-helix have been reported. Generally speaking, β-peptides form a more stable helix than α-peptides. β-Peptides are stable against proteolytic degradation in vitro and in vivo, a potential advantage over natural peptides. β-Peptides have been used to mimic natural peptide-based antibiotics such as magainins, which are highly potent but difficult to use as drugs because they are degraded by proteolytic enzymes.
Primary structure Elzinga and co-workers first determined the complete peptide sequence for this type of actin in 1973, with later work by the same author adding further detail to the model. It contains 374 amino acid residues. Its N-terminus is highly acidic and starts with an acetyled aspartate in its amino group, while its C-terminus is alkaline and is formed by a phenylalanine preceded by a cysteine, which has a degree of functional importance. Both extremes are in close proximity within the I-subdomain. An anomalous Nτ-methylhistidine is located at position 73.
The molecular weight of c7orf26 is 50 kilodaltons. The isoelectric point is 7.61. The protein sequence is uniquely rich for leucine at 15.8% of its composition, this may indicate a leucine-zipper. Further analysis from PSORT indicates that a leucine-zipper region is found at amino acid 318 and lasts until position 340 (22 amino acids long). There are no extremes with regards to acidity and alkalinity. c7orf26 has a positive charge cluster from amino acid 245 – 275 and does not have any negative, or mixed charge clusters. An even distribution of amino acids compose c7orf26. The percent composition of each amino acid is fairly consistent throughout the orthologs of the protein. The most distant ortholog displays the most variance in amino acid composition. There is a higher percent composition of tyrosine, histidine and leucine and a lower composition of valine and alanine.
Sources: en.wikipedia.org
No. TB-500 is a short synthetic peptide matching residues 17 to 23 of thymosin beta-4, while the parent protein contains 43 residues. The fragment lacks the rest of the protein sequence, so the two are related but not identical.
It consists of leucine, lysine, lysine, threonine, glutamic acid, threonine, and glutamine in that order. The N-terminal leucine is usually acetylated in the forms described in catalogues.
Controlled human data is limited, and most published findings come from cell culture or animal work. This makes it difficult to state clinical effects with confidence.
Desiccated storage at −20 °C is conventional, with −80 °C for extended periods. Vials should be warmed to room temperature before opening to prevent condensation on the powder.